 |
 |
 |
 |
 |
 |
 |
 |
 |
Over 40,000 Hand and Power Tools.
Welcome to our family of over 475,000 satisfied customers.
|
|
|
Over 40,000 Hand and Power Tools. Welcome to our family of over 475,000 satisfied customers. |
|
|
 |
Ph: 800-347-5096 Hours: M-F 6:30a - 4:00p (Pacific) |
 |
Compare Tools Index Chipping and Demolition Hammers
 |
Chipping and Demolition Hammer Comparison |
|
Not sure which Hammer model is best for you? This compare page was designed to help you decide. Below is a comparison of the prices and features of each Chipping Hammer & Demo Hammer that we carry - listed in order of price from lowest to highest. Click on the product model number for additional information. If you need further assistance, please let us help. Call one of our tool experts at 1-800-347-5096 or email us. |
|
| Chipping & Demolition Hammer Comparison | |||
|---|---|---|---|
 |
DeWalt D25330K L-Shape SDS Chipping Hammer |
L-Shape design offers superior balance and
control 2.5 ft-lbs of impact energy provides powerful chipping 6.3 Amp motor provides high performance and overload protection At only 11-1/2" this hammer is the most compact in the market allowing users to get into tight spaces Light weight design (6.5 lbs) provides comfort for extended use |
$340.75 |
 |
Makita HK0500 Power Scraper (SDS-PLUS) 5.0 AMP |
Accepts standard
SDS-Plus bits 5.0 Amps - 2000-3500 Blows/Min. Speed control dial for setting maximum blows per minute One-touch sliding chuck for easy bit installation and removal 12 position bit adjustment; angle can be changed with bit in place Low noise at only 98dB - Factory grease packed Includes Scaling Chisel & Tool Case |
$334.24 |
 |
Makita HM0810B 11 LB. Demolition Hammer 8.3 AMP |
Accepts commonly used
3/4" hex and 21/32" round steel
(spline shank) 8.3 Amps - 2900 Blows/Min. - 11.7 Lbs. Soft rubber grip side handle swivels 360° Anti-vibration spring positioned between tool body & rear handle One-touch tool retainer action for easy accessory installation Carbon brushes last for approximately 150 hours Includes Tool Case |
$364.24 |
 |
Makita HK1810 Power Scraper Kit (Hex Shank) 5.0 AMP |
Accepts Makita
"small hex" bits 5.0 Amps - 0-3200 Blows/Min. Air cushion hammering for long tool life Quick change bit retainer for easy changes Automatic brush cut-out system to protect motor Factory grease packed for reduced maintenance Includes 2 Scaling Chisels, Bull Point & Tool Case |
$379.74 |
 |
Makita HM0870C 11 Lb. Demolition Hammer, SDS Max - 10.0 AMPS |
Blows per Minute: 1,100 - 2,650 BPM Impact Energy: 11.4 Joules / 8.4 ft.lbs. AMPS (120V): 10.0 Bit Type: Accepts SDS-MAX Bits Vibration (m/s2): 11.0 Overall Length: 17-3/4" |
$461.99 |
 |
Bosch 11388 SDS MAX Demolition Hammer |
Rating 120V Amperage 10.0 No Load BPM 2,800 Impact Energy (ft. lbs.) 5.9 Length 17-1/2 Inch Weight (lbs.) 11.6 |
$460.24 |
 |
Bosch 11387 Round Hex Demolition Hammer |
Rating 120V Amperage 10.0 No Load BPM 2,800 Impact Energy (ft. lbs.) 5.9 Length 17-1/2" Weight (lbs.) 12 |
$460.24 |
 |
Milwaukee 5446-21 SDS-Max Demolition Hammer 14.0 AMP - 15 lbs |
14 Amp, 1,300 MWO Milwaukee Motor- provides best in class power and highest overload protection 8.8 ft/lbs Impact Energy- heavy duty crank piston mechanism delivers hard hitting performance 2 Speed Impact Mode- low reduces beats per minute (2,200 BPM) for light materials AVS: Anti Vibration System- actively reduces user vibration and increases productivity D-Handle - provides optimal grip and control for chiseling applications |
$557.99 |
 |
Bosch 11321EVS 12 Lb SDS-Max® Demolition Hammer |
Accepts SDS-Max
bits 13 Amps, 8.1 ft-lbs Impact energy & 14.3 lbs Impact Energy (Ft. Lbs.) 9.6 Constant Response Circuitry - Provides soft-start, maintains constant speed under load, provides overload protection Vario-Lock positioning - rotates and locks chisel, 12 positions Length 18.5" - Weight (lbs.) 13.6 Includes Carrying Case |
$560.99 |
 |
Makita HM1211B 20 LB. Demolition Hammer 10.0 AMP |
Accepts commonly
used 3/4" hex shank bits 10.0 Amps - 2,000 Blows/Min. - 20.7 Lbs. Air cushion piston for longer tool life Comfortable rubber D-shaped side handle secures in four positions One touch latch bit retainer for quick bit changes Automatic brush cut-out when periodic servicing is due Factory grease packed for reduced maintenance Includes Tool Case |
$584.99 |
 |
DeWalt D25831K 12 lb. SDS Max Demolition Hammer Kit with Shocks |
13.5 Amp motor maximum performance and overload protection. 9.5 ft-lbs of impact provides powerful chipping and faster destruction rates. Vibration Measurement: 8.3 m/s2. Loaded Speed (BPM): 1430 - 2840bpm SHOCKS - Active Vibration Control reduces vibration up to 50% while increasing user comfort and productivity. Electronic variable speed allows the user to control the speed of chipping and impact energy DeWalt D25831K includes: SDS Max Demolition Hammer, Side handle, Bit Grease, and Kit Box |
$618.00 |
 |
DeWalt D25851K DeWalt Spline Demolition Hammer Kit with Shocks |
13.5 Amp motor maximum performance and overload protection. Vibration Measurement: 8.3 m/s2 9.5 ft-lbs of impact provides powerful chipping and faster destruction rates. Loaded Speed (BPM): 1430 - 2840bpm SHOCKS - Active Vibration Control reduces vibration up to 50% while increasing user comfort and productivity. Electronic variable speed allows the user to control the speed of chipping and impact energy. Variable Impact. DeWalt D25851K includes: Spline Demolition H ammer, Side Handle, Bit Grease, and Kit Box |
$618.00 |
 |
Makita HM1203C 20 LB. Demolition Hammer, SDS Max 14.0 AMP |
Accepts SDS-Max bits
14.0 Amps - 950-1900 Blows/Min. - 20 Lbs; 22-3/4" Long. Rubberized rear and side handle for reduced vibration Side handle rotates 360° and pivots forward and back. Electronic variable speed adjusting dial for controlled operation. Bit can be set at numerous positions for operating convenience. Automatic brush cut-out system. Easy to operate push button on/off switch. Service reminder light indicates when to replace carbon brushes Hard hitting 25.5J (20.3 lb), ideal for horizontal work Double insulated 12 bit angles settings - Bit can be set at 12 different positions for operating convenience. SDS-Max technology gives you a more precise impact and reduced friction for increased tool life. Includes: Bit Grease (181573-3), Plastic Tool Case (150676-4), Side Handle, Bull Point, and Cleaning Cloth |
$650.49
|
 |
DeWalt D25899K SDS Max Demolition Hammer Kit |
Power Input: 1500
Watts Power Output: 750 Watts Hand/Arm Vibration: 12 m/s2 Blows per Minute: 2040 bpm Impact Energy: 25 J Tool Holder: SDS Max Morse Taper Tool Weight: 20.9 lbs. Lenght: 650mm Height: 250mm Includes: Multi position side handle, Heavy duty carrying case |
$713.25 |
 |
Milwaukee 5337-21 3/4 Inch Demolition Hammer |
Accepts standard 3/4
inch steel hex Use For Breaking: Concrete Slabs, Asphalt Cutting, Clay Digging, Tamping, Ground Rod Driving Powerful 19.9 Ft.-Lbs. Of Blow Energy Heavy-Duty Metal Gear Case For Extended Life Net Weight: 24 Lbs. - Length: 27.5 Inch Includes Carrying Case & Auxillary Handles |
$764.99 |
 |
Milwaukee 5339-21 SDS-Max Demolition Hammer 14.0 AMP |
Uses Standard
SDS-max Hammer Iron |
$764.99 |
 |
DeWalt D25891K DeWalt 19 LB. SDS Max Demolition Hammer |
15 Amp motor for maximum performance and overload protection. The 15-foot-pounds of impact energy provides powerful chipping and faster destruction rates. Lock-on slide switch provides increased user comfort in extended use applications Modular design allows easy access to switch, motor, cordset, brushes and gear case for ease of service Vibration Control: Yes. Vibration Measurement: 12.4 m/s2 Loaded Speed (BPM): 1,152-2,304bpm. DeWalt D25891K includes: SDS Max Demolition Hammer, Side handle, Bit Grease, Kit Box |
$741.74 |
 |
Bosch 11316EVS 22 LB. Electronic VS Demolition Hammer (SDS-MAX) |
Accepts SDS-Max
bits 14.0 Amps - No Load 900-1890 Blows/Min. Impact Energy (Ft. Lbs.) 4.4 - 18.4 Constant Response Circuitry - Provides soft-start, maintains constant speed under load, provides overload protection Vario-Lock positioning - rotates and locks chisel, 12 positions Length 22.5" - Weight (lbs.) 22.5 Cord Length (ft.) 12 Includes Carrying Case |
$797.49 |
 |
Bosch 11317EVS 3/4 Inch Hex Demolition Hammer |
Rating 120V Amperage 12.8 No Load BPM 850 - 1800 Impact Energy (ft. lbs.) 4.0 - 16.5 Length 22" Weight (lbs.) 22 Cord Length (ft.) 12 |
$785.74 |
 |
DeWalt D25901K SDS Max Demolition Hammer Kit |
Power Input: 1500
Watts Power Output: 750 Watts Hand/Arm Vibration: 7.9 m/s2 Blows per Minute: 1020-2040 bpm Impact Energy: 5-25 J Tool Holder: SDS Max Tool Weight: 23.1 lbs. Lenght: 690mm Height: 250mm Includes: Multi position side handle, Chisel, Grease, Cloth, Heavy duty carrying case |
$881.25 |
 |
Makita HM1214C 27 LB. AVT Demolition Hammer with SDS Max |
Powerful 14 AMP motor to handle the most demanding applications Anti-Vibration Technology (AVT), Makita's exclusive counterbalance system, reduces vibration Electronic variable speed control dial enables user to set the speed to the application L.E.D. service light indicates carbon brushes need to be replaced 12 bit angle settings allow user to reposition for their application Side handle swivels 360° for greater control |
$902.49 |
 |
Makita |
Powerful 14.0 AMP motor delivers 730-1,450 BPM to handle the most demanding applications Anti-Vibration Technology is an internal counterbalance system that greatly reduces vibration and directs more impact energy to the work surface for increased user comfort and greater productivity Impact Energy: 34.9 Joules / 25.7 ft.lbs. Bit Type: 1-1/8" Hex Shank. Vibration (m/s2): 12.2 Overall Length: 32-1/2" |
$913.74 |
 |
DeWalt D25941K Heavy Duty Demolition Hammer Kit |
Power Input: 1600
Watts Power Output: 790 Watts Hand/Arm Vibration: 8.8 m/s2 Blows per Minute: 1620 bpm Impact Energy: 30.6 J Tool Weight: 29 lbs. Lenght: 750mm Height: 250mm Includes: Multi position side handle, Pointed chisel, Grease, Cloth, Heavy duty carrying case |
$985.00 |
 |
Makita HM1500B 42 LB. Demolition Hammer 13.5 AMP |
Accepts commonly
used 1-1/8" hex shank bits & air tool bits 13.5 Amps - 1300 Blows/Min. - 42 Lbs. Innovative pneumatic compression system minimize power loss Special idling mechanism reduces hammering while idling Anti-vibration main handle markedly reduces operator fatigue Side handle swivels 360° Rubber-ringed brush holder lengthens life of brushes and armature Factory grease packed for about 200 hours of lube free operation Automatic brush cut-out system - Double insulated Includes Steel Tool Case |
$1027.99 |
 |
Makita HM1317CB 42 lb. AVT Breaker Hammer; Accepts 1-1/8 Inch Hex Shank Bits |
Anti-vibration technology (AVT), Makita's exclusive counterbalance system, reduces vibration
Powerful 14 AMP Motor to Handle the Most Demanding Applications
Electronic Variable Speed Control Dial Enables User to set the Speed to the Application
Enlarged Carbon Brush for Increased Tool Life Includes Plastic tool case w/ wheels and Bull point |
$1114.49 |
 |
Bosch 11335K 1-1/8 Inch 35 lbs Breaker Hammer Kit |
Rating 120V Amperage 15 No Load BPM 1300 Impact Energy (ft. lbs.) 34 Length 30" Weight (lbs.) 62 |
$1150.99 |
 |
DeWalt D25712K DeWalt 1-7/8 Inch SDS Max Combination Hammer with CTC |
Powerful 13 Amp motor that provides maximum performance and overload protection. The 11.7-Foot-pounds. Impact Energy provides fast drilling and powerful chipping. Optimal Concrete Drilling: 1 - 1 5/8 In. SHOCKS - Active Vibration Control reduces vibration up to 50% while increasing user comfort and productivity. Complete Torque Control (CTC) - Patented 2 Stage clutch provides maximum control in bind up situations. DeWalt D25712K includes: SDS Max Combination Hammer, 360° side handle, kit box |
$1192.50 |
 |
DeWalt D25762K 2 In. SDS Max Combination Hammer with CTC |
Powerful 15 Amp motor that provides maximum performance and overload protection. SHOCKS - Active Vibration Control reduces vibration by up to 50%. Optimal Concrete Drilling: 1" - 1-3/4". Complete Torque Control (CTC) utilizes patented 2-stage clutch for maximum control in bind-up situations. Vibration Measurement: 9.3 m/s2. No Load Speed: 125-250rpm. Blows/Min: 1,150-2,304bpm DeWalt D25762K includes: SDS Max Combination Hammer, 360° side handle, Kit Box |
$1348.50 |
 |
DeWalt D25980 68 LB. Heavy Duty Breaker Hammer 15.0 AMP |
61 Ft-lbs impact
energy provides maximum performance SHOCKS - Active Vibration Control reduces user fatigue and increases comfort and productivity Max Watts Out: W Loaded Speed (bpm): 900 Variable Impact Control Dial: Settings 15 amp motor provides maximum power and overload protection Rubber coated handles provide greater comfort and control Electronic soft start increases productivity by reducing bit walking |
$1561.50 |
 |
Makita HM1810 64 LB Breaker Hammer (AC/DC) 15.0 AMP |
Accepts commonly
used 1-1/8" hex shank bits & air tool bits Powerful 15.0 AMP motor; efficient 1,100 BPM to tackle the most demanding jobs Counterbalance system reduces vibration to only 8 m/s for unmatched comfort Lowest noise level in its class at only 107 dB Automatic brush cut-out system protects commutator for longer tool life 16.4 ft. jobsite cord for greater versatililty and instant power Factory grease packed for about 200 hours maintenance free Cylindrical tool holder enables new bolt holes to be drilled should the original bolts break Warning lamp indicates trouble with the cord; AC/DC switch for use with alternative power sources Large, easy to operate switch for operator comfort and control |
$1599.74 |
| See other pages comparing: Hammer-Drills, SDS Rotary Hammers, SDS-Max Rotary Hammers, Spline Shank Rotary Hammers |
| What's the difference between a Hammer-Drill and a Rotary Hammer? |
|
| Homepage |
Tool Search |
|
FAX Order |
Tell a Friend | | Contact Us | Report Errors with this page | Closeout Sale | |
 |
| Sales/Info 800-347-5096 | 4730 W. Spring Mountain Road, Las Vegas, Nevada 89102 | FAX (702) 871-2815 |