DeWalt DWACPRIR Impact Connect Copper Tubing Cutter with Brace Bracket 1/2"-1" Capacity , Includes 1/2" and 3/4" Cutting Wheels

Works great on new installation or small repairs, cuts copper pipes fast and with no or low effort, the down side is that it's bulky and a bit bigger and feel akward when handling. But overall is a great product.

Its a nice tool, once installed on an impact it is very heavy. Once cutting the tool cuts very well minimal bur on the inside on the pipe, not bur on the outside of the pipe. Biggest complaint is the handle clamp does not fit around any attachments on the impact IE belt clip or bit holder. Occasionally the cutter slips on the pipe and takes a turn or two to engage and start cutting.

The connection between impact and accessory are fantastic. I used this on a small plumbing job in my home and it saved me a lot of time with clean cuts and less down time than a traditional copper cutter. As someone who owns multiple impacts, this fits seamlessly into my existing tools.

The cutter has great cutting speed. It has the convenient of changing out the three common sides. It’s good in tight spots and multiple cutting. It’s only good for the impact drills. It’s as big compare to the drill and as heavy.

This copper cutter definitely works and is up to the task of making all of your copper pipe cuts much easier than using a manual cutter. With some practice, it attaches to my impact driver pretty easily and quickly. I appreciate that both the 1/2" and 3/4" cutting wheels are included with the tool, and its easy and quick to change out the cutting wheels. I've used both sizes and so far no issues with any cuts. The attachment is somewhat bulky and quite heavy, but it does somehow still manage to fit into all the tight spaces. A nice feature is that the nose rotates 360 degrees and this helps with tight spaces and angles. Overall this is a very efficient solution for cutting copper pipe. For me the biggest drawbacks are the heavy weight of the attachment and that it takes an impact driver out of service if you are making frequent cuts. This is why I drop from 5 to 4 stars. For a few cuts, its a perfect solution. If I needed to make cuts all day long I would be more inclined to spend a bit more and purchase a dedicated powered cutting tool.

I had it on a few jobs and it made them a lot easier.sure if your limited to space this is not your tool but this was very easy to put on a impact driver that i had as a spare. it cuts pretty fast and leaves a decent edge i still de bur the copper.my only problem i had was the spring that locked the bar to the base the spring kept shooting out when taking it off tool here and there.

I first thought the copper pipe cutter would be too bulky and heavy to be practical, but its usefulness outweighs any bulk and weight. I had no issues getting the rotating head into some fairly tight framing to cut old ¾" copper.
Assembly and use was pretty easy to figure out without looking at instructions. It fits my red brand drills and drivers perfectly after removing belt clip and bit holder, not a big deal - if I'm using this on a job, it will be in a dedicated drill/driver anyway.
Set up took less than 2 minutes.
Changing the cutter head takes about 3 seconds!
Each cut takes 4-5 seconds. Nice clean cuts!
Great tool.

The tool I didn't know I needed!!! To my surprise this copper tube cutting tool worked quite well. cut 3/4" ridged copper fast and easy. I would assume it would do equally as well on 1" but did not include the attachment for that. It did include the 1/2" attachment but seemed to me to be overkill for that unless you are doing a bigger project. If you are going to use it regularly I would suggest an additional drill/driver so not to have to switch back and forth...

My first time using the copper pipe cutter attachment was to remove an old shower valve. When setting up this attachment I presumed it was going to be awkward and clumsy. I was truly surprised how wrong I was. I cut the pipes just below the 2x4 with plenty of room to spare between the pipe and the drywall behind it. I was impressed with how clean the cut was with a lot of the self adjusting manual cutters it leaves a ridge, this was not the case with this attachment. Set up was quick and easy and I was able to figure it out quickly without referring to the instructions. It even fit on my impact with the bit holder attached. It is easy to switch to a driver bit as the base attachment has a quick disconnect so you can switch between cutting and screws fast. Swapping the cutting head is very fast and straight forward.

This product is a bit bulky but it is durable enough tp get the job done. I would definitely recommend this product because it comes from a reputable superior quality brand.