Proto

View Proto Master Set Product ListFEATURES:1258 Pieces. 1/4", 3/8", 1/2", 3/4" Drive Tools. Designed for fastener sizes 1/16" - 2-3/8", 2mm - 26mm....

FEATURES:•Extended operation range in ft-lb, In-lb and Nm units. •Precision Accuracy: + / -1% in BOTH directions. •Accuracy valid from 10% to 100% ...

Proto J6232 Features Maximum rated input: 173 ft/lb (235 Nm) Maximum rated output: 3,200 ft/lb (4,338 Nm). Standard to...

FEATURES: •Satin finish provides corrosion resistance and a slip resistant grip. •12 point box end allows for fine indexing, helping to improve sp...

Proto J6222 Features Gear system: two stage planetary Angle of turn protractor: 5° increments. Anti-backlash device: s...

Proto J99530 Description 1258 Pieces. 1/4", 3/8", 1/2", 3/4" Drive Tools. Designed for fastener sizes 1/16" - 2-3/8", 2mm - 26mm. Proto J99530 In...

Proto J6476 Features Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or whe...

FEATURES:141 Pieces. 1/4", 3/8", 1/2" Drive Tools.Designed for fastener sizes 3/16" - 1-1/4". Tools only. Contains: 69 Sockets and Accessories, 27 ...

Proto J6472 Features Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or whe...

FEATURES:• Includes components to assemble a wide variety of 3 ton, 6 ton, 10 ton, slide hammer and threaded part pullers.

Proto J6022B Features Ft / Lbs. Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full ...

Proto J6020AB Features 120-600 Ft Lbs English Range of this wrench Calibrated to +/- 3% clockwise direction and +/- 6% counte...

FEATURES:•Proto® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. •The TorquePl...

FEATURES:•Metric. •Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise direction at 20% to 100% of full scale. •Calibration is a...

Proto JSCVM-22S Includes 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm,18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30m...

FEATURES:•Ft / Lbs. •Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. •Calibration is accomplished by mechani...

Proto JSCV-20S Features Black chrome finish is corrosion resistant and visually distinctive. Fractional spline wrenches can b...

FEATURES:•Extended operation range in ft-lb, In-lb and Nm units. •Precision Accuracy: + / -1% in BOTH directions. •Accuracy valid from 10% to 100% ...

FEATURES:•Maximum rated input: 227 ft/lb (308 Nm). •Maximum rated output 750 ft/lb (1,017 Nm). •Standard torque accuracy is +/- 5% of reading. •Rea...

Proto J4390B Features Removes gears and bearings too close to another surface for puller jaw grip or where the pulled out part must be protected ...

Proto J54124 Includes (1) EXTENSION, 1/2" DR 2-1/2" (1) EXTENSION, 1/2" DR 5" (1) EXTE...

Proto J6018AB Features Ft / Lbs. Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full...

Proto J1200F-T500 Features Full polish finish provides corrosion resistance and easy to clean surfaces. 12 point box end allo...

FEATURES:• 0-50 ft/lb thru 0-2000 ft/lb / 0-7 m/kg thru 0-280 m/kg. • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full ...