Proto

View Proto Master Set Product ListFEATURES:1258 Pieces. 1/4", 3/8", 1/2", 3/4" Drive Tools. Designed for fastener sizes 1/16" - 2-3/8", 2mm - 26mm....

Proto J6232 Features Maximum rated input: 173 ft/lb (235 Nm) Maximum rated output: 3,200 ft/lb (4,338 Nm). Standard to...

FEATURES:•Extended operation range in ft-lb, In-lb and Nm units. •Precision Accuracy: + / -1% in BOTH directions. •Accuracy valid from 10% to 100% ...

FEATURES: •Satin finish provides corrosion resistance and a slip resistant grip. •12 point box end allows for fine indexing, helping to improve sp...

Proto J99530 Description 1258 Pieces. 1/4", 3/8", 1/2", 3/4" Drive Tools. Designed for fastener sizes 1/16" - 2-3/8", 2mm - 26mm. Proto J99530 In...

Proto J6476 Features Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or whe...

Proto J6222 Features Gear system: two stage planetary Angle of turn protractor: 5° increments. Anti-backlash device: s...

Proto J6472 Features Use to test all types of torque wrenches in all types of settings where full scale calibration is needed or whe...

Proto J1200-80ASD Features Satin finish provides corrosion resistance and a slip resistant grip. 12 point box end allows for ...

FEATURES:141 Pieces. 1/4", 3/8", 1/2" Drive Tools.Designed for fastener sizes 3/16" - 1-1/4". Tools only. Contains: 69 Sockets and Accessories, 27 ...

FEATURES:• Includes components to assemble a wide variety of 3 ton, 6 ton, 10 ton, slide hammer and threaded part pullers.

Proto J6022B Features Ft / Lbs. Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full ...

Proto J4292B Features Required for large parts with heavy press-fits. • Reaches to over 12" and a spread of 11". • Makes 10 differen...

Proto J6020AB Features 120-600 Ft Lbs English Range of this wrench Calibrated to +/- 3% clockwise direction and +/- 6% counte...

FEATURES:•Extended operation range in ft-lb, In-lb and Nm units. •Precision Accuracy: + / -1% in BOTH directions. •Accuracy valid from 10% to 100% ...

FEATURES:•Proto® 12 Point Sockets are ideal for use on stubborn or damaged fasteners, and also on fasteners made from soft materials. •The TorquePl...

FEATURES:• Presses parts into place without hydraulics. • Functions as many different pullers either by itself or in combination with other Proto p...

Proto JSCVM-22S Includes 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm,18mm, 19mm, 21mm, 22mm, 24mm, 27mm, 30m...

FEATURES:•Ft / Lbs. •Calibrated to +/- 3% in clockwise direction and +/- 6% in counter clockwise direction. •Calibration is accomplished by mechani...

Proto J6018AB Features Ft / Lbs. Calibrated to +/- 3% clockwise direction and +/- 6% counter clockwise at 20% to 100% of full...

FEATURES:• 0-50 ft/lb thru 0-2000 ft/lb / 0-7 m/kg thru 0-280 m/kg. • Accurate to ± 4% of torque reading in both directions at 20% to 100% of full ...

Proto JSCV-20S Features Black chrome finish is corrosion resistant and visually distinctive. Fractional spline wrenches can b...

Proto J4390B Features Removes gears and bearings too close to another surface for puller jaw grip or where the pulled out part must be protected ...

FEATURES:•Satin finish provides corrosion resistance and a slip resistant grip. •12 point box end allows for fine indexing, helping to improve spee...